What Should Be Handed Over with an SXRX Manual Bioethanol Burner?
SXRX Project Handover
The burner is installed. Is the user ready?
A clear handover turns a manual bioethanol insert from an unfamiliar appliance into a deliberate, repeatable part of the room.
The current SXRX Stainless Steel Bioethanol Burner Insert listing describes a drop-in, chimney-free burner made from 304 stainless steel. Its manual sliding lid is adjusted and closed with the included flame-adjustment and extinguisher hook tool. Those details make the handover unusually important: the owner needs to know not only where the burner is, but where the tool, manual and approved fuel routine live.
1. Give the hook tool a permanent home
The tool should be easy for an adult operator to reach without leaning over the flame, yet inaccessible to children and guests. Do not substitute improvised utensils. During handover, demonstrate how the tool engages with the sliding lid while the appliance is cool and unlit; the specific operating sequence must follow the supplied manual.
2. Explain what the sliding lid controls
The product listing states that the sliding lid adjusts flame height and extinguishes the burner. Show the user the full travel of the lid while cold. Make sure surrounding joinery, decorative objects or a tight access opening do not obstruct the operator’s hand or the hook tool.
3. Record the exact installed variant
The live store currently lists seven sizes from 400 × 300 × 115 mm to 1000 × 300 × 115 mm. Put the ordered size, product link and project contact on the handover sheet. That small record makes future questions about fit, replacement parts or a second matching installation much easier.
| Handover item | What to confirm |
|---|---|
| Burner | Correct variant, stable seating and unobstructed lid |
| Hook tool | Present, undamaged and stored in a named location |
| Manual | Accessible to every responsible operator |
| Site rules | Ventilation, clearances and local requirements documented |
4. Rehearse a cold, no-fuel walkthrough
Ask the future operator to point out the tool, identify the lid’s open and closed positions, and explain what they would do before filling, lighting and refilling. This is a knowledge check—not permission to improvise. Never add fuel to a burning or hot appliance, and never move or service it while operating.
5. Leave project-specific safety information
A chimney-free design does not remove the need for suitable ventilation, non-combustible construction, clearances, supervision and compliance with local rules. The exact installation and fuel instructions should come from the product manual and the qualified project professional. For related reading, see our chimney-free planning guide and cooldown and refuelling guide.
Plan the handover before installation day
Share the opening dimensions, intended operator access and project documentation needs with SXFireplace.